AMS Go
Free calculator

Vibration calculator: daily vibration exposure A(8) for hand-arm vibration

Enter the vibration total value and exposure time per tool – the calculator shows the daily vibration exposure A(8), compares it with the action value and exposure limit value of the German Noise and Vibration Ordinance and lists the duties.

As of October 2026

Your details
Hand-guided or hand-held machines used on a typical working day.
Tool 1
m/s²
min

Only the time the tool is actually vibrating

Tool 2
m/s²
min

Only the time the tool is actually vibrating

Result under the German Noise and Vibration Ordinance

Daily vibration exposure

2.65m/s²

A(8), normalised to 8 hours
Classification

Action value exceeded

above 2.5 m/s²

Implement a programme of technical and organisational measures to reduce exposure, instruct employees and offer occupational health care.

At 4 m/s², this tool alone reaches the action value of 2.5 m/s² after about 3.1 hours a day.

Manufacturer vibration values are often lower than the values in real use. The risk assessment under TRLV Vibration needs realistic values, for example from measurements or databases of the accident insurance institutions.

Next step

Record vibration in the risk assessment

In AMS Go you assess vibration per activity in the risk assessment, track measures such as replacing tools or rotation plans in the action plan and follow up on training in the training matrix.

30 minutes · no obligation · directly with the founding team

The calculator provides an estimate based on your input. It does not replace the risk assessment under TRLV Vibration and is not legal advice.

How the calculator works

  1. 1

    Daily vibration exposure A(8)

    For each tool, the vibration total value a(hv) in m/s² and the actual exposure time count. The calculator adds the shares in quadrature and normalises them to eight hours: A(8) = √(Σ a(hv)² · duration/8 h).

  2. 2

    Comparison with action and limit value

    For hand-arm vibration, the action value is A(8) = 2.5 m/s² and the exposure limit value is 5 m/s² (Section 9 LärmVibrationsArbSchV).

  3. 3

    Duties per level

    Once the action value is reached, employees must be instructed. If it is exceeded, a programme of reduction measures is needed and health care must be offered. The limit value must not be exceeded; if it is reached, health care is mandatory.

  4. 4

    Limits of the calculator

    The calculator does not cover whole-body vibration, for example on vehicles. Manufacturer data are often lower than real values in use – the risk assessment under TRLV Vibration needs realistic values.

Frequently asked questions

How is A(8) calculated for several tools?

For each tool, the vibration total value is squared and weighted by its share of eight hours. The square root of the sum is taken: A(8) = √(Σ a(hv)² · T(i)/8 h).

Which values apply to hand-arm vibration?

The action value is A(8) = 2.5 m/s² and the exposure limit value is 5 m/s² (Section 9 LärmVibrationsArbSchV). Different values apply to whole-body vibration.

Where do I get the vibration total value?

From the tool's operating instructions, from measurements or from databases of the accident insurance institutions. Manufacturer values are determined under test conditions and are often lower than in real use.

How do I reduce vibration exposure?

Mainly through low-vibration tools and processes, good maintenance, shorter exposure times and rotating between tasks. Because the duration is under the square root, cutting the exposure time to a quarter halves the A(8) value.

Contact

Get in touch

Book an appointment with us – or send us a message.

Kim Marius GräfeFrank MezlerLukas KleinBenjamin Kostrzewa

Personal and direct – with our founding team. Meet the founding team