AMS Go
Free template · Safety instruction

Machine safety briefing template with knowledge check (PDF)

Ready-to-use briefing on operating machinery safely under Section 12 BetrSichV: operating instructions and check before starting, safeguards and emergency stop, clothing and jewellery, clearing faults only at standstill – with a tick-box knowledge check and attendance list.

As of PDFAMS Go editorial team

Free: sign up for the newsletter once and all templates are unlocked in this browser. You can unsubscribe at any time.

At machines, the most serious injuries occur where someone reaches into running parts, is caught or drawn in – often while clearing a fault, cleaning or because a safeguard was bypassed. Section 12 of the German Ordinance on Industrial Safety and Health (BetrSichV) therefore requires employees to be briefed before they use work equipment for the first time and then at least once a year: on the hazards, the protective measures and rules of conduct, and on what to do in the event of malfunctions and accidents.

The free template contains a ready-to-use briefing to present and tick off: operating instructions and the check before starting, safeguards and emergency stop, clothing, jewellery and protective equipment, and clearing faults only on a machine that has been stopped and secured. It also includes a do-and-don't table, what to do about defects, a knowledge check with eight questions and an attendance list. You add the induction on the individual machine using its operating instructions.

What the template contains

  • PDF briefing with header details on area, person giving the briefing, type of briefing and basis
  • Four topic blocks to tick off: before you start, safeguards and emergency stop, clothing, jewellery and protective equipment, clearing faults, cleaning and setting up
  • Do-and-don't table and what to do about defective safeguards, machines behaving unusually, faults and accidents
  • Knowledge check with eight tick-box questions, answer key for the person giving the briefing and attendance list with signatures

How to use the template

  1. 1

    Adapt

    Enter the machines in the area and their operating instructions and add your rules: who may operate which machine, how machines are secured against restart and who clears faults. Delete what does not occur in your company.

  2. 2

    Brief at the machine

    Go through the topic blocks at a machine: show the safeguards, emergency stop and main switch, demonstrate securing against restart and discuss typical faults and who is allowed to clear them.

  3. 3

    Check and sign

    Have the knowledge check completed on paper or on this page, discuss wrong answers and have the attendance list signed – Section 12 BetrSichV requires the date and the names of those briefed to be recorded in writing. Add reported defects to the action plan.

Training matrix in AMS GoAssign the machine safety briefing to all operators, have attendance and the knowledge check confirmed digitally and send reminders in good time for the annual repeat.

Knowledge check

Test your knowledge after the safety briefing. Exactly one answer per question is correct.

  1. Question 1 of 8Who may operate a machine in the company?
  2. Question 2 of 8The guard gets in your way during a particular operation. What do you do?
  3. Question 3 of 8A workpiece has jammed and the machine is still running. How do you proceed?
  4. Question 4 of 8What is the emergency stop for?
  5. Question 5 of 8What do you wear at machines with rotating parts, such as a pillar drill?
  6. Question 6 of 8The light barrier on your machine has failed, but the machine can still be started. What is correct?
  7. Question 7 of 8Someone has pressed the emergency stop. When is the machine started again?
  8. Question 8 of 8How often are you briefed on the safe use of machinery?

The check does not replace a documented safety briefing. With AMS Go you assign briefings digitally and document attendance and knowledge checks in an audit-proof way.

Legal basis

  • Section 12(1) Ordinance on Industrial Safety and Health (BetrSichV): briefing before work equipment is used for the first time and then at least once a year, date and names recorded in writing
  • Section 12(2) and (3) BetrSichV: written operating instructions before first use; work equipment involving particular hazards only by assigned employees
  • Sections 4(5) and 6(2) BetrSichV: check for obvious defects before use; use safeguards, do not tamper with or bypass them
  • Section 8(5) and (6) BetrSichV: stopping and isolating from energy sources, emergency control device
  • Sections 10 and 11 BetrSichV: safe maintenance, set-up and adjustment work only by competent persons
  • Sections 15 and 16 Occupational Safety and Health Act (ArbSchG): use work equipment and protective devices as intended, report defects in protective systems without delay

Frequently asked questions

How often must employees be briefed on machinery?

Before the machine is used for the first time and then at regular intervals, at least once a year (Section 12(1) BetrSichV). Also when things change, such as a new machine, a changed process or after an accident (Section 12 ArbSchG). You record the date and the names of those briefed in writing.

Is the manufacturer's instruction manual enough as operating instructions?

It can be: instead of operating instructions, the employer may also provide a supplied instruction manual if it contains information equivalent to operating instructions (Section 12(2) BetrSichV). In practice, short operating instructions in a form and language people understand are usually the better basis for the briefing because they contain your own company's rules.

May safeguards be taken out of operation for setting up?

Only under strict conditions. If protective measures have to be taken out of operation during set-up, adjustment or testing, the safety of employees must be ensured by other suitable measures, and the work may be carried out only by competent persons (Section 11(4) BetrSichV). For normal operation the rule is: safeguards must not be tampered with or bypassed.

You may use and adapt the template freely in your own company and for your own clients. It reflects the regulations named as they stand.

Never search a spreadsheet for a deadline again

In AMS Go, what this template covers lives in one system with reminders, history and records at the push of a button – mobile and with AI support.

Contact

Get in touch

Book an appointment with us – or send us a message.

Kim Marius GräfeFrank MezlerLukas KleinBenjamin Kostrzewa

Personal and direct – with our founding team. Meet the founding team