AMS Go
Free template · Risk assessment

Painters and decorators risk assessment template (PDF & Excel) – pre-filled

Pre-filled risk assessment for painters and decorators with 19 typical hazards – from solvents, isocyanates and sanding dust to asbestos and old coatings in existing buildings, ladders, scaffolds and skin protection – with measures, legal bases and inspection intervals.

As of PDF and ExcelAMS Go editorial team

Free: sign up for the newsletter once and all templates are unlocked in this browser. You can unsubscribe at any time.

Painters and decorators work with solvents, paints and coatings, sand dusty substrates and often stand on ladders and scaffolds while doing so. In existing buildings there is also asbestos in plaster, fillers and tile adhesives, as well as old coatings containing lead. The obligation to carry out a risk assessment (Gefährdungsbeurteilung) follows from Sections 5 and 6 of the Occupational Safety and Health Act (ArbSchG) and Section 6 of the Hazardous Substances Ordinance (GefStoffV); for ladders and scaffolds, the Ordinance on Industrial Safety and Health (BetrSichV) with TRBS 2121 applies.

The template comes pre-filled with 19 typical hazards and common measures – each with its legal basis. You add the rating, owners and deadlines for your company; a second overview lists the periodic inspections, training, health care and instructions, with automatic due dates in Excel.

What the template contains

  • Landscape PDF with 19 pre-filled hazards from solvents, isocyanates and sanding dust to asbestos, ladders and scaffolds
  • Same structure as the general risk assessment: hazard factor, risk rating, STOP measures, deadlines, effectiveness
  • Excel spreadsheet with drop-down lists and automatic risk calculation
  • Overview of 9 periodic inspections, health care and instructions – in the PDF and as an Excel sheet that calculates the next due date

How to use the template

  1. 1

    Record products and activities

    Compile which products you use – emulsion paints, lacquers, 2K products, epoxy resins, paint strippers – and use safety data sheets and the GISCODE for comparison. Distinguish new builds, renovation of existing buildings, facades and the workshop. Delete rows that do not apply.

  2. 2

    Check and rate the site

    Before work in existing buildings, clarify the year of construction and harmful substances in the substrate before any sanding or milling. Look at ladders, scaffolds, fall edges, ventilation and power supply and rate each hazard by likelihood and severity.

  3. 3

    Follow up measures and inspections

    Enter owners and deadlines, check effectiveness and keep ladders, scaffolds, electrical equipment, extraction, the diisocyanate training, health care and instructions up to date in the second sheet.

Risk assessments in AMS GoTemplates for each activity, AI suggestions for typical painting and decorating hazards, photos of the current situation and measures with deadlines in the action plan – with a history of every change.

Legal basis

  • Sections 5, 6 and 8 ArbSchG: risk assessment, documentation, coordination with other employers
  • Sections 6, 7, 12 and 14 GefStoffV with TRGS 401, 510, 553, 559 and 900: solvents, dust, skin protection, fire and explosion protection, storage, instruction
  • Sections 5a, 11 and 11a GefStoffV with TRGS 519 and DGUV Information 201-012: client's duty to provide information, permitted work with asbestos, notification, qualification, low-emission methods
  • REACH Regulation Annex XVII Nos. 59 and 74, ArbMedVV Annex Part 1: dichloromethane in paint strippers, training for diisocyanates, health care for isocyanates, epoxy resins, lead and wet work
  • BetrSichV with TRBS 2121 Parts 1 and 2, ASR A2.1, DGUV Regulation 3: scaffolds, ladders, protection against falls, electrical equipment

Frequently asked questions

May we paint and sand walls in old buildings if there could be asbestos in the plaster?

Painting and wallpapering without working on the substrate are not regarded as work with asbestos under TRGS 519. It is different as soon as you remove material from the substrate – sanding, milling, removing plaster or filler: then you must first clarify whether asbestos is present. If construction began after 31 October 1993, it can generally be assumed that no asbestos is present (Section 11a GefStoffV); the client must give you the information available and the year of construction (Section 5a GefStoffV). Work on asbestos-containing materials is only permitted within the limits of Section 11 GefStoffV and requires a determination of the risk, qualification, notification of the authority and suitable methods under TRGS 519.

How long may work be done from a ladder?

Under TRBS 2121 Part 2, you may use a ladder as a workstation up to a standing height of 2 m, and between 2 m and 5 m only for temporary work of no more than two hours per shift. Work is done with both feet on a step or platform, not on rungs. Beforehand, you check in the risk assessment whether safer work equipment such as a scaffold or platform ladder is an option.

Who needs the training for diisocyanates?

Everyone who professionally uses products with a diisocyanate content of 0.1 % by weight or more – this includes many 2K polyurethane paints and coatings and assembly foams. Since 24 August 2023, such products may only be used after successfully completed training; it must be repeated at least every five years (REACH Regulation Annex XVII No. 74). Whether a product is affected is stated on the label and in the safety data sheet.

You may use and adapt the template freely in your own company and for your own clients. It reflects the regulations named as they stand.

Never search a spreadsheet for a deadline again

In AMS Go, what this template covers lives in one system with reminders, history and records at the push of a button – mobile and with AI support.

Contact

Get in touch

Book an appointment with us – or send us a message.

Kim Marius GräfeFrank MezlerLukas KleinBenjamin Kostrzewa

Personal and direct – with our founding team. Meet the founding team